|
Low Smear and High Sensitivity
The ICD-808/808P(1/3" CCD) employ a
high-sensitivity on-chip lens CCD. The smear level is -110dB for the
ICD-808/808P. They also achieve a high sensitivity with a minimum object
illumination of 0.5 lx/F1.4 for the ICD-808/808P. These cameras are
ideally suited for outdoor surveillance, such as traffic monitoring.
Spot Backlight Compensation
The camera is capable of specifying
only a backlight area displayed on the screen and reproducing the
backlight scene as an optimal image. Even when, for example, a car's
number plate or a person is captured in a backlight situation, its image
can be reproduced crisply.
Auto White Balance
In addition to Auto White Balance
(ATW1) of auto-tracking type, the camera also features ATW2 that is
compatible with sodium-vapor lamps used for lighting on highways and
other purposes. Thus, it can capture optimal video under various
conditions, both indoors and outdoors.
AES (Automatic Electronic Shutter)
The camera boasts AES capability
with a sensitivity ratio of about 1:1600 (NTSC) or 1:2000 (PAL). Even
with a fixed-aperture lens, the sensitivity can be adjusted
appropriately according to changes in illumination of the surveillance
area.
*These feature cannot be used in geographical regions
where the line frequency and the camera's vertical frequency are
different from each other.
High Picture Quality
It delivers 480 lines of
horizontal resolution. Incorporating state-of-the-ar1 digital process
circuitry, the camera can reproduce a rock- solid, sharp image.
Remote Setup
The pushbutton located on the
rear of the camera allows various setups to be customized. With the aid
of the optional RCU-701 Remote Control Unit >>>> or RSU-871 (RS-232
control), you can set up the camera installed on the top of the building
or at any elevated place by use of the same cable as the video coaxial.
Setup Function
Local Setup (Using 5 buttons and set on OSD(On Screen Display)
Color/Black & While Mode select/Level Adjust, Camera ID,
AES/Electronic Shutter. BLC ON OFF SPOT Level Adjust, GENLOCK Phase Adjust,
DO Iris Level, INT/LL, Detail Level, AGC ON/OFF, White Balance,
CROMA Level, PED Level, HUE, Operation Lock
Remote Setup Function
With Using RCU-701 or RSU-871(Mutliplex transmission system), All
Local setup Functions are available
|
