 Network
IP Camera
Simply connect the Network IP Camera to any switch, hub or Ethernet port
and VIEW from any PC on the network! With 30 frames/sec. full motion video
the cameras are accessible and configurable over the Internet. No
PC required*,
connects directly to any 10/100 Mbps hub or switch. |
|
|
| FEATURES: |
- No special software or
additional hardware required. Simply type the camera’s
assigned IP address into your browser and view live, full
motion video
- Access the camera from any PC
on your LAN
- Assign a "live" IP
address for anytime, anywhere viewing over the Internet
- Ideal for monitoring buildings,
offices, daycare, schools, homes, etc. - anywhere with a network
connection
- Embedded operating system
streams live video directly to your website
- Records streaming images or
snapshots on your PC
- Sends images via email
- Saves full motion DivX5 video on
your hard drive
- Automatically uploads images to
FTP server or sends images out via email, fully configurable,
SMTP authentification supported
- Built-in motion detection function, 10 levels of
sensitivity
|
| WEB
BROWSER PLUGIN FUNCTIONS: |
- Snap shot saving
- Record a DivX5 movie to your
hard drive
- Resizing image size
- Adjusting frame rate
- Sample DivX5 video, 10 secs,
320*240 pixes here
(1 MB)
|
|
|
Multicam Remote Surveillance:
NTI is pleased to offer our clients the cutting edge in security system
technology. Multicam Remote Surveillance has many applications including,
monitoring, employee training and security. It has many advantages over
the traditional VHS tape-based security system:
-
Digital recordings are saved to a computer disk.
-
All recordings are time and date stamped, making them easy to find.
-
Digital recordings are admissible as court evidence. Traditional VHS
security tapes are not.
-
Cameras record only when they sense motion in the room to save disk
space.
-
System can be programmed to call police when cameras sense motion during
off hours.
-
System can be accessed remotely, so business can be monitored real-time
from another location.
-
Data can be located and pulled easily, making it ideal for training
purposes.
|
 |
 |
| *Temporary
connection of PC required for initial programming of IP addresses and
admin settings only. After programming is completed computer can be
disconnected and is not needed for camera to function. All other settings
can be done via the Internet through the control panel of the camera. |
|
